Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 79
Peripheral Board Switches, Table 4-4, System Configuration Switch, Switch, Open Off Position
![]() |
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4-14 Installing Hardware Components Peripheral Board Switches The following table defines the switch settings for the peripheral board. The Open (off) position is the default configuration for each switch. Table 4-4 System Configuration Switch Switch 1. Video Open (Off) Position Enable integrated video Closed (On) Position Disable integrated video 2. Lock Configuration Configuration can be changed Configuration can not be changed 3. Rack Mount System is tower configuration System is rack mount configuration 4. Diskette Override Diskette boot is controlled by Diskette is enabled for booting configuration regardless of configuration 5. Password Enable Power on password is enabled Power on password is disabled 6. Maintenance * NV RAM is valid NV RAM is invalidated, configuration is lost NOTE: See the ProLiant 5500 Service and Maintenance Guide for information on the use of this switch. For use with Intel Pentium II Xeon processor-based servers only
![](/manual_guide/products/compaq-proliant-5500-compaq-proliant-5500-setup-installation-guide-pentium-ii-xeon-processorbased-servers-eeb44d9/79.png)