Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 81
Loosen the thumbscrews on the front of the drive cage.
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4-16 Installing Hardware Components 2 1 Figure 4-13. Removing a fan 3. Unlock the server, open the front panel, and slide the front panel up and away from the server. Figure 4-14. Removing front panel 4. Loosen the thumbscrews on the front of the drive cage. 5. Pull out the latch at the back of the drive cage (shown in Figure 4-16) and pull out the drive cage 2 to 3 inches to allow better access to cables. For use with Intel Pentium II Xeon processor-based servers only
4-16
Installing Hardware Components
For use with Intel Pentium II Xeon processor-based servers only
1
2
Figure 4-13.
Removing a fan
3.
Unlock the server, open the front panel, and slide the front panel up and
away from the server.
Figure 4-14.
Removing front panel
4.
Loosen the thumbscrews on the front of the drive cage.
5.
Pull out the latch at the back of the drive cage (shown in Figure 4-16)
and pull out the drive cage 2 to 3 inches to allow better access to cables.