Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 137
Hot-Plug SCSI Hard, Internal TurboDAT
![]() |
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
7-22 Cabling SCSI Cable Usage Matrix for Duplex Mode Continued Controller Smart-2 Array Controller, /P, /DH With Loopback SCSI Option Hot-Plug SCSI Hard Drives in Internal Drive Cage s Use cable option kit 306585-B21. This kit includes the loop back SCSI cable kit and a SCSI slot bracket. 2/4 DAT Drive 4/8 DAT Drive Internal TurboDAT Autoloader 8X SCSI CD-ROM 4/16 TurboDAT 15/30 DLT Drive Tape Drives and CDROMs are not supported using a SMART-2 Array Controller 35/70 DLT Drive Tape Drives and CDROMs are not supported using a SMART-2 Array Controller s Connect 19-inch point-to-point nonterminated SCSI cable (199606007) from the internal SCSI connector of the optional controller board to SCSI Input 0 of the duplex board. s Connect 8.75" external loopback SCSI cable from external SCSI connector of optional controller board to a SCSI slot bracket. Install this bracket in an unused slot. s Connect 20-inch cable shipped with the optional controller board from SCSI slot bracket to SCSI Input 1 of duplex board. Continued For use with Intel Pentium II Xeon processor-based servers only
![](/manual_guide/products/compaq-proliant-5500-compaq-proliant-5500-setup-installation-guide-pentium-ii-xeon-processorbased-servers-eeb44d9/137.png)