Compaq ProLiant 5500 Compaq ProLiant 5500 Setup and Installation Guide Pentium - Page 126
X SCSI CD-ROM, Controller/P
View all Compaq ProLiant 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
7-11 SCSI Cable Usage Matrix for Simplex Mode Continued Controller 32 Bit Fast-Wide SCSI-2 Controller/P and Wide-Ultra Controller/P Hot-Plug SCSI Hard Drives in Internal Drive Cage s Use cable option kit, part number 306585-B21. s Connect 19-inch point - to - point non-terminated cable (199606007) from optional controller board to SCSI Input 0 of Simplex board. 2/4 DAT Drive 4/8 DAT Drive Internal TurboDAT Autoloader 8X SCSI CD-ROM 4/16 TurboDAT 15/30 DLT Drive s Use cable option kit, part number 306585-B21. s Connect 32-inch 3device terminated SCSI cable (199616-012) from optional controller board to removable media bay devices. s Use 50 to 68 pin adapter (199618-001),if needed. s See note 1. 35/70 DLT Drive s Use cable option kit, part number 306585-B21. s Connect 32-inch 3-device terminated SCSI cable (199616012) from optional controller board to removable media bay devices. Smart-2 Array s Controller /P, /SL, /DH and Smart s Array 3200 Controller Use Cable option kit, part number 306585-B21. Connect 19-inch point-to-point non-terminated SCSI cable (199606-007) from optional controller board to SCSI Input 0 of Simplex board. Tape Drives and CD-ROMs are not supported using a SMART2 Array Controller. Tape Drives and CDROMs are not supported using a SMART-2 Array Controller. Note 1: If additional 50 to 68 pin adapters are needed order Kit #212055-001. Note 2: The SCSI Port 2 Controller is connected to the SCSI Port 2 connector and external SCSI connector. It is recommended that you use SCSI Port 2 controller for either internal or external drives, not both. Compaq ProLiant 5500 Servers Setup and Installation Guide For use with Intel Pentium II Xeon processor-based servers only