D-Link DSN-6410 User Manual for DSN-6410 - Page 112
Replication
View all D-Link DSN-6410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
5.11 Replication Replication function will help users to replicate data easily through LAN or WAN from one IP SAN storage to another. The procedures of Replication are on the following: 1. Copy all data from source VD to target VD at the beginning (full copy). 2. Use Snapshot technology to perform the incremental copy afterwards. Please be fully aware that the incremental copy needs to use snapshot to compare the data difference. Therefore, the enough snapshot space for VD clone is very important. • Setup the Replication port on the source IP SAN storage The Replication uses the last iSCSI port on the controller to replicate the data. When the iSCSI is configured as Replication port, it is no longer available for the host to connected as iSCSI port until it is configured as the normal iSCSI port again. 1. In the operation menu of the last iSCSI port on the controller, select "Enable Repication" to set this port as the Replication port. The last iSCSI port on controller 2 will also be set as the Replication port automatically at the same time. Figure 5.11.1 2. The setting can be reverted by select "Disable Replication" in the operation menu. Figure 5.11.2 112