D-Link DSN-6410 User Manual for DSN-6410 - Page 70
Volume configuration / RAID group, Create, Select PD, Step 2
View all D-Link DSN-6410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Figure 4.4.6.1 1. Select "/ Volume configuration / RAID group". 2. Click "Create". 3. Input a RG Name, choose a RAID level from the list, click "Select PD" to choose the RAID physical disks, then click "OK". 4. Check the setting. Click "OK" if all setups are correct. 5. Done. A RG has been created. Figure 4.4.6.2 (Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named "RG-R5".) Step 2: Create VD (Virtual Disk). To create a data user volume, please follow the procedures. 70
70
Figure 4.4.6.1
1.
Select
“/ Volume configuration / RAID group”
.
2.
Click
“Create“
.
3.
Input a RG Name, choose a RAID level from the list, click
“Select PD“
to choose the
RAID physical disks, then click
“OK“
.
4.
Check the setting. Click
“OK“
if all setups are correct.
5.
Done. A RG has been created.
Figure 4.4.6.2
(Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named “RG-R5”.)
Step 2:
Create VD (Virtual Disk).
To create a data user volume, please follow the procedures.