D-Link DSN-6410 User Manual for DSN-6410 - Page 29

Quick setup

Get D-Link DSN-6410 PDF manuals and user guides View all D-Link DSN-6410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Chapter 3 Quick setup 3.1 Management interfaces There are three management methods to manage D-LINK IP SAN storage, describe in the following: 3.1.1 Serial console Use console cable (NULL modem cable) to connect from console port of D-LINK IP SAN storage to RS 232 port of management PC. Please refer to figure 2.3.1. The console settings are on the following: Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control. Terminal type: vt100 Login name: admin Default password: 123456 3.1.2 Remote control SSH (secure shell) software is required for remote login. The SSH client software is available at the following web site: SSH Tectia Client: http://www.ssh.com/ PuTTY: http://www.chiark.greenend.org.uk/ Host name: 192.168.0.32 (Please check the DHCP address first on LCM.) Login name: admin Default password: 123456 Tips D-LINK product supports SSH for remote control only. For using SSH, the IP address and password are required for login. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
29
Chapter 3
Quick setup
3.1
Management interfaces
There are three management methods to manage
D-LINK
IP SAN storage, describe in
the following:
3.1.1
Serial console
Use console cable (NULL modem cable) to connect from console port of
D-LINK
IP SAN
storage to RS 232 port of management PC. Please refer to figure 2.3.1. The console
settings are on the following:
Baud rate:
115200
, 8 data bit, no parity, 1 stop bit, and no flow control.
Terminal type:
vt100
Login name:
admin
Default password:
123456
3.1.2
Remote control
SSH (secure shell) software is required for remote login. The SSH client software is
available at the following web site:
SSH Tectia Client:
PuTTY:
Host name:
192.168.0.32
(Please check the DHCP address first on LCM.)
Login name:
admin
Default password:
123456
Tips
D-LINK
product supports SSH for remote control only. For using SSH, the
IP address and password are required for login.