Dell DX6004S Hardware Owner's Manual - Page 22
LCD Status Messages
View all Dell DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
LCD Status Messages The system's control panel LCD provides status messages to signify when the system is operating correctly or when the system needs attention. The LCD lights blue to indicate a normal operating condition, and lights amber to indicate an error condition. The LCD scrolls a message that includes a status code followed by descriptive text. The table that follows provides a listing of LCD status messages and the probable cause for each message. The LCD messages refer to events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation. NOTE: If your system fails to boot, press the System ID button for at least 5 seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 161. Table 1-1. LCD Status Messages Code N/A E1000 Text Causes Corrective Actions SYSTEM NAME A 62-character string that This message is for can be defined by the user information only. in the System Setup program. You can change the system ID and name in The SYSTEM NAME is the System Setup displayed under the program. See "Using the following conditions: System Setup Program • The system is powered on. and UEFI Boot Manager" on page 51. • The power is off and active errors are displayed. Failsafe Check the system event voltage error. log for critical failure Contact events. support. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 161. 22 About Your System