Dell DX6004S Hardware Owner's Manual - Page 25
Check CPU is, CPU Bus parity
View all Dell DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 1-1. LCD Status Messages (continued) Code E1414 E1418 E141C E141F E1420 Text Causes Corrective Actions CPU # temp exceeding range. Check CPU heatsink. Specified processor is out Ensure that the processor of acceptable temperature heat sink is properly range. installed. See "Troubleshooting the Processor" on page 150 and "Troubleshooting System Cooling Problems" on page 143. CPU # not detected. Check CPU is seated properly. Specified processor is missing or bad, and the system is in an unsupported configuration. Ensure that the specified microprocessor is properly installed. See "Troubleshooting the Processor" on page 150. Unsupported Processor is in an CPU unsupported configuration. configuration. Check CPU or BIOS revision. Ensure that your processor matches and conforms to the type described in the processor technical specifications outlined in your system's Getting Started Guide. CPU # protocol The system BIOS error. Power has reported a processor cycle AC. protocol error. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 161. CPU Bus parity The system BIOS has error. Power reported a processor bus cycle AC. parity error. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 161. About Your System 25