Dell DX6004S Hardware Owner's Manual - Page 81
Hard Drives, Removing a Hard-Drive Blank
View all Dell DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Hard Drives Your system supports up to four 3.5-inch (SAS or SATA) hard drives in 3.5inch hot-swap hard drive carrier. The hard drives are installed at the front of the system (see Figure ). The front-mounted hard drives are connected to a SAS backplane through hard-drive carriers and can be configured as hotswappable. Removing a Hard-Drive Blank CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. CAUTION: To maintain proper system cooling, all empty hard-drive bays must have hard-drive blanks installed. 1 If applicable, remove the front bezel. See "Removing the Front Bezel" on page 75. 2 Grasp the front of the hard-drive blank, press the release lever on the right side, and slide the blank out until it is free of the drive bay. See Figure 3-5. Installing System Components 81