Dell DX6004S Hardware Owner's Manual - Page 39
Invalid PCIe card, Warning: Memory
View all Dell DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 1-2. System Messages (continued) Message Causes Corrective Actions Invalid PCIe card The system halted because found in the an invalid PCIe expansion Internal_Storage card is installed in the slot! dedicated storage controller slot. Remove the PCIe expansion card and install the integrated storage controller in the dedicated slot. See "Getting Help" on page 161. Keyboard fuse has Overcurrent detected at the See "Getting Help" on failed. keyboard connector. page 161. Local keyboard may not work because all user accessible USB ports are disabled. If operating locally, power cycle the system and enter system setup program to change settings. The USB ports are disabled in the system BIOS. Power down and restart the system from the power button, and then enter the System Setup program to enable the USB port(s). See "Entering the System Setup Program" on page 52. Manufacturing mode detected. System is in manufacturing Reboot to take the system mode. out of manufacturing mode. Maximum rank count exceeded. The following DIMM has been disabled: x. Invalid memory configuration. The system will run but with the specified memory module disabled. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 98. Memory Initialization Warning: Memory size may be reduced. Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. than is physically available. See "General Memory Module Installation Guidelines" on page 98. About Your System 39