Dell DX6004S Hardware Owner's Manual - Page 94
the system from the electrical outlet., Open the system. See Opening the System
View all Dell DX6004S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 76. 3 Remove the SAS backplane cables routed over the shroud from the system board. 4 Hold the touch points and gently lift the shroud straight up and away from the system board. See Figure 3-10. Figure 3-10. Removing and Installing the Cooling Shroud 1 2 4 1 power distribution board shroud 2 3 tabs (2) 4 3 system board shroud fan bay numbers 94 Installing System Components
94
Installing System Components
CAUTION:
Never operate your system with the cooling shroud removed. The
system may get overheated quickly, resulting in shutdown of the system and loss of
data.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 76.
3
Remove the SAS backplane cables routed over the shroud from the system
board.
4
Hold the touch points and gently lift the shroud straight up and away from
the system board. See Figure 3-10.
Figure 3-10.
Removing and Installing the Cooling Shroud
1
power distribution board shroud
2
system board shroud
3
tabs (2)
4
fan bay numbers
1
2
3
4