Dell PowerEdge 4100 Service Manual - Page 62
Microprocessor and Heat Sink
 |
View all Dell PowerEdge 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Microprocessor and Heat Sink clip heat sink microprocessor socket thermal pad (bonded to heat sink) microprocessor pin-1 corner of socket front tab Figure 4-20. Microprocessor Configuration The computer may have two microprocessors. To remove a microprocessor and heat sink, follow these steps: 1. Remove the microprocessor securing clip from the microprocessor/heat sink assembly. WARNING: The microprocessor chip can get extremely hot during system operations. Be sure the chip has had sufficient time to cool before touching it. Press down on the folded part of the clip with a small screwdriver to release the clip (see Figure 4-21). 4-20 Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57 -
58 -
59 -
60 -
61 -
62 -
63 -
64 -
65 -
66 -
67 -
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
4-20
Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual
Microprocessor and Heat Sink
Figure 4-20.
Microprocessor Configuration
The computer may have two microprocessors. To remove a microprocessor and
heat sink, follow these steps:
1.
Remove the microprocessor securing clip from the microprocessor/heat
sink assembly.
Press down on the folded part of the clip with a small screwdriver to release
the clip (see Figure 4-21).
WARNING: The microprocessor chip can get extremely hot during
system operations. Be sure the chip has had sufficient time to cool
before touching it.
microprocessor
socket
front tab
clip
thermal pad
(bonded to heat sink)
microprocessor
pin-1 corner of socket
heat sink