Dell PowerEdge R840 EMC Installation and Service Manual - Page 47
System cover, Removing the system cover
View all Dell PowerEdge R840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. Align and insert the right end of the bezel onto the system. 2. Press the release button and fit the left end of the bezel onto the system. 3. Lock the bezel by using the key. Figure 18. Installing the optional front bezel System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Turn off the system, including all attached peripherals. 3. Disconnect the system from the electrical outlet and disconnect the peripherals. 4. If applicable, remove the system from the rack. NOTE: For more information, see the Rail Installation Guide at www.dell.com/poweredgemanuals. Steps 1. Use a 1/4 inch flat head or a Phillips #2 screwdriver to turn the latch release lock counterclockwise to the unlock position. 2. Open the latch till the system cover slides back. 3. Lift the cover away from the system. Figure 19. Removing the system cover Installing and removing system components 47