Dell PowerEdge R840 EMC Installation and Service Manual - Page 87
Installing expansion card into the expansion card riser
![]() |
View all Dell PowerEdge R840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Figure 47. Installing a filler bracket for a riser Next steps 1. Install expansion card into the expansion card riser. Installing expansion card into the expansion card riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 44. 2. Follow the procedure listed in Before working inside your system on page 45. 3. If installing a new expansion card, unpack it and prepare the card for installation. NOTE: For instructions, see the documentation accompanying the card. 4. Remove the applicable air shroud. 5. Remove the expansion card risers. NOTE: The procedure to remove expansion card from riser for all risers is identical. Steps 1. Open the black expansion card latch on the riser. 2. Open the blue card holder latch on the riser. 3. If installed, remove the filler bracket. Installing and removing system components 87
![](/manual_guide/products/dell-poweredge-r840-emc-installation-service-manual-fc1c869/87.png)