Dell PowerEdge R840 EMC Installation and Service Manual - Page 85
Removing expansion card from the expansion card riser
View all Dell PowerEdge R840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Table 19. x8 PCIe riser 1 + x8 PCIe riser 2 configuration (continued) Card type Slot priority Riser height Maximum number of cards supported Card height 3,4 Low profile 1 Half length External RAID 3,4 Low profile 2 Half length 1,2,5,6 Full height 2 Half length Infiniband HCA 3,4 FDR Low profile 2 Half length 40Gb NICs 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length FC32 HBA 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length 25G NICs 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length FC16 HBA 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length 10Gb NICs 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length FC8 HBA 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length 1Gb NICs 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length 3,4 Low profile 2 Half length Non-RAID 3,4 Low profile 2 Half length 1,2,5,6 Full height 4 Half length NVMe PCIe SSD 1,2,5,6,3,4 Full height or Low 2 profile Half length rNDC Integrated Slot None 1 None Integrated Slot None 1 None Integrated Slot None 1 None Card length Low profile Low profile Full height Low profile Maximum PCIe width supported x8 x8 x8 x8 Full height x8 Low profile x8 Full height x8 Low profile x8 Low profile x8 Full height x8 Full height x8 Low profile x8 Low profile x8 Full height x8 Low profile x4 Full height x4 Low profile x8 Full height x8 Full height x1 Low profile x1 Full height x4 Low profile x4 Low profile x8 Full height x8 Full height or Low x8 profile rNDC x8 rNDC x1 rNDC x4 Removing expansion card from the expansion card riser Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 44. 2. Follow the procedure listed in Before working inside your system on page 45. 3. Remove the air shroud. 4. Remove the expansion card risers. Installing and removing system components 85