Dell PowerEdge T30 Owners Manual - Page 37
Recommended tools, System cover, Removing the system cover
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Reconnect the peripherals and connect the system to the electrical outlet. 4. Turn on the system, including any attached peripherals. Related tasks Installing the system cover Related reference Safety instructions Recommended tools You need the following tools to perform the removal and installation procedures: • Phillips #1 screwdriver • Phillips #2 screwdriver • Wrist grounding strap System cover The system cover protects the components inside the system and helps in maintaining air flow inside the system. Removing the system cover activates the intrusion switch. Removing the system cover Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Turn off the system and any attached peripherals. 3. Disconnect the system from the electrical outlet and peripherals. 4. Place the system on a flat, stable surface. Steps Pull the system cover release latch and lift the system cover away from the system Installing and removing system components 37