Dell PowerEdge T30 Owners Manual - Page 47
Installing the I/O panel
![]() |
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 15. Removing the I/O panel Next steps 1. Install the I/O panel. 2. Install the bezel 3. Follow the procedure listed in the After working inside your system section. Related tasks Before working inside your system Removing the bezel Installing the I/O panel Installing the bezel After working inside your system Related reference Safety instructions Installing the I/O panel Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. Remove the bezel. 4. Keep the Phillips #2 screwdriver ready. Steps 1. Insert the input/output (I/O) panel data and USB cables. 2. Push the I/O panel into the guide slot and push it downward to lock the assembly into place. 3. Tighten the screw to secure the I/O panel to the chassis. 4. Connect the I/O panel data and USB cables to the system board. Installing and removing system components 47
![](/manual_guide/products/dell-poweredge-t30-owners-manual-3708331/47.png)