Dell PowerEdge T30 Owners Manual - Page 61
Installing the optical drive
![]() |
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. If applicable, remove the power and data cables from the optical drive and hard drives in the hard drive cage. 4. Remove the bezel. 5. Remove the hard drive cage. 6. Remove the screws securing the optical drive. Steps 1. Hold the tabs on the optical drive filler and remove the optical drive filler from the hard drive cage. 2. Slide the optical drive out of the optical drive bay. Figure 27. Removing the optical drive Next steps 1. Install the optical drive filler in the bezel. 2. Install the hard drive cage. 3. If applicable, connect the power and data cables from the optical drive and hard drives. 4. Install the bezel. 5. Follow the procedure listed in the After working inside your system section. Related tasks Before working inside your system Removing the bezel Removing the hard drive cage Installing the optical drive filler Installing the optical drive Installing the bezel Installing the hard drive cage After working inside your system Installing the optical drive Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and Installing and removing system components 61
![](/manual_guide/products/dell-poweredge-t30-owners-manual-3708331/61.png)