Dell PowerEdge T30 Owners Manual - Page 72
Expansion cards, Expansion card installation guidelines, Removing an expansion card
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Figure 37. Installing the system fan Next steps 1. Connect the system fan power cable to the system fan connector on the system board. 2. Follow the procedure listed in the After working inside your system section. Related tasks Before working inside your system After working inside your system Expansion cards An expansion card in the system is an add-on card that can be inserted into an expansion slot on the system board or riser card to add enhanced functionality to the system through the expansion bus. Expansion card installation guidelines Table 37. PCI Express Generation 3 expansion cards supported Expansion card type PCIe Slot Processor Connection PCIe 1 Processor PCI 2 PCIe and PCI Bridge PCIe 3 Platform Controller Hub (PCH) PCIe 4 Platform Controller Hub (PCH) Height Full height Full height Full height Full height Length Link Width Slot Width Half length x16 Half length Half length x4 x16 32/33 x4 Half length x4 x16 NOTE: All the PCIe slots support Generation 2 and 3 PCIe expansion cards. NOTE: The expansion cards are not hot-swappable. NOTE: The power consumption of the PCIe expansion cards is less than 25 W. Removing an expansion card Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and 72 Installing and removing system components