Dell PowerEdge T30 Owners Manual - Page 42
Power switch, Removing the power switch
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Figure 10. Inside the system 1. hard drive in the cage (4) 3. chassis fan 5. expansion card release latch 2. power supply unit 4. system board 6. hard drive in the hard-drive bay (2) Power switch The power switch allows you to turn the system on or off. Removing the power switch Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. Remove the bezel. 4. Disconnect the power-switch cable from the system board. 5. Keep the Phillips #2 screwdriver ready. Steps 1. Remove the power-switch cable from the chassis clip. 2. Remove the screw securing the power switch to the chassis. 42 Installing and removing system components