Dell PowerEdge T30 Owners Manual - Page 44
Chassis intrusion switch, Removing the chassis intrusion switch
![]() |
View all Dell PowerEdge T30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 12. Installing the power switch Next steps 1. Install the bezel. 2. Follow the procedure listed in the After working inside your system section. Related tasks Before working inside your system Installing the bezel After working inside your system Related reference Safety instructions Chassis intrusion switch The chassis intrusion switch detects and logs when the system cover is removed. This switch is activated as soon as the system cover is removed. Removing the chassis intrusion switch Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your system section. 3. Disconnect the chassis intrusion switch cable from the system board. Steps 1. Hold the chassis intrusion switch and slide the switch into the free space next to it. 2. Push the chassis intrusion switch down and out of the slot. 44 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t30-owners-manual-3708331/44.png)