Dell TL2000 User Guide - Page 185

Table 8-1. Main Error Codes (continued) Error Code Description 8E Cannot find gripper block within the expected range 8F Cannot find slider block within the expected range 90 Cannot find elevator block within the expected range 91 Cannot find rotation block within the expected range 92 Cannot find sled block within the expected range 93 Gripper outside range, Gripper has reached a position beyond the expected range 94 Slider outside range, Slider has reached a position beyond the expected range 95 Elevator outside range, Elevator has reached a position beyond the expected range 96 Rotation outside range, Rotation has reached a position beyond the expected range 97 Sled outside range, Sled has reached a position beyond the expected range 98 Cartridge present sensor not found 99 Slider home sensor not found 9A Rotation home sensor not found 9B Sled position sensor (fiducial sensor) not found 9C Gripper range out of specification 9D Slider range out of specification 9E Elevator range out of specification 9F Rotation range out of specification A0 Sled range out of specification A1 Open I/O Station (Import/Export Element) failed A2 Error during elevator locking A6 No elevator home sensor found B0 Robotic controller response timeout. A command did not complete in the required amount of time. B1 NACK (not acknowledged) received from robotic controller B2 Accessor controller communication failed B3 Accessor controller urgent stop due to a released magazine B4 Cartridge did not transport completely B5 Accessor controller does not respond on command User Action Refer to "Isolating a Library Controller Card vs. Accessor Enclosure Problem" on page 7-10. Possible Replacement CRUs: v Primary: Library Enclosure v Secondary: Library Controller Card 1. Verify that the left and right magazines are completely inserted, then retry operation. 2. Refer to "Isolating a Library Controller Card vs. Accessor Enclosure Problem" on page 7-10. Possible Replacement CRUs: v Primary: Library Enclosure v Secondary: Library Controller Card Chapter 8. Error Codes 8-3