Dell TL2000 User Guide - Page 78
Setting Up Encryption, Setting a Drive's Method of Encryption, Con Library, Encryption - lto4
View all Dell TL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Figure 4-22. Feature Key verification screen Note: Follow the instructions in the Dell PowerVault TL4000 Failover Configuration Guide to configure your environment for failover. Setting Up Encryption Note: Application Managed Encryption (AME) does not require a key. Library Managed Encryption requires a license key. The customer should contact their TSR (technical sales representative) to purchase this feature. Minimum Prerequisites for Application Managed Encryption: v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height) v Ultrium 4 Tape Cartridge v Library firmware level 5.80 or higher v Drive firmware level 77BE or higher v Tape backup software application that supports LTO4 encryption Minimum Prerequisites for Library Managed Encryption: v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full Height or Half Height) v Ultrium 4 Tape Cartridge v Library firmware level 5.80 or higher v Drive firmware level 77BE or higher v Dell Encryption Key Manager application Setting a Drive's Method of Encryption 1. Click Configure Library → Encryption in the left navigation pane. Figure 4-23. Feature Activation Key screen 2. On the Encryption screen, enter the Feature Activation Key to make available the library managed encryption options. 3. Click Activate to save the key and expand the screen for additional encryption settings. 4-22 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide a77ug199