Dell TL2000 User Guide - Page 77

a77ug098 One cartridge magazine cannot be assigned to two logical libraries. If you partition a multi-drive library, each of the magazines must be assigned to a logical library on a magazine boundary. The entire magazine must be part of one logical library only. Note: If you have a 2U library with two drives, you have the capability to have two logical libraries. In a fully populated 4U library with four half height drives and four logical libraries, resource assignments will be as follows: v Logical Library 1 will contain Drive 1 and the lower left cartridge magazine. v Logical Library 2 will contain Drive 2 and the upper left cartridge magazine. v Logical Library 3 will contain Drive 3 and the lower right cartridge magazine. v Logical Library 4 will contain Drive 4 and the upper right cartridge magazine. The I/O Station and slots reserved for cleaning cartridges, if any, are shared among all logical libraries. 1. Click Configure Library → Logical Libraries in the left navigation pane. Figure 4-20. The 4U library Configure Library: Logical Libraries page 2. Select the number of logical libraries you would like to create in your library. 3. Click Submit to create the logical libraries. Entering Path Failover Feature Activation Key For more information, refer to the Dell PowerVault TL4000 Failover Configuration Guide, included with the library documentation. 1. Click Configure Library → Path Failover in the left navigation pane. Figure 4-21. The Configure Library: Path Failover Feature Activation screen 2. Enter the Control Path Failover 12-digit feature key in the spaces provided. 3. Click Activate to save the feature key. The following screen will display if you have correctly entered the feature key. Chapter 4. Installation and Configuration 4-21 a77ug117