Epson 1640XL User Manual - Page 62

Transporting the Transparency Unit

Get Epson 1640XL - Expression Graphic Arts PDF manuals and user guides
UPC - 010343833548
View all Epson 1640XL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

4. Turn the transportation lock at the back of the scanner to the locked position. Locked position If you are using a transparency unit and it is switched on, the scanner carriage will not move to the home position. Remove the transparency unit first, then perform the steps above. See the next section for instructions. Transporting the Transparency Unit After you've removed the transparency unit from the scanner, prepare it for shipping as follows: 1. Turn the transparency unit so the glass side faces up. 2. Use a Phillips head (cross head) screwdriver to remove the shipping screws from the storage holes. 3. Install the screws into the Storage holes shipping holes (the outer holes). 56 Transporting the Transparency Unit

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
56
Transporting the Transparency Unit
4.
Turn the transportation lock at the back of the scanner to the
locked position.
Transporting the Transparency Unit
After you’ve removed the transparency unit from the scanner, prepare it for shipping
as follows:
1.
Turn the transparency unit so the glass side faces up.
2.
Use a Phillips head (cross head)
screwdriver to remove the
shipping screws from the
storage holes.
3.
Install the screws into the
shipping holes (the outer holes).
If you are using a transparency unit and it is switched on, the scanner
carriage will not move to the home position. Remove the transparency
unit first, then perform the steps above. See the next section for
instructions.
Locked position
Storage holes