Epson 3800 Service Manual - Page 129

EPSON Stylus Pro 3800/3800C/3850 4.3.6.5 APG SENSOR 1. Remove the HOUSING, UPPER. (p106) 2. Remove the COVER, CR. (p150) 3. Remove the screw that secures the MOUNT PLATE, DETECTOR, PG, and remove the MOUNT PLATE, DETECTOR, PG. „ One C.B.P. 3 x 8 screw (5 ± 1 kgf.cm) When installing the MOUNT PLATE, DETECTOR, PG to the CARRIAGE, ASSY., be sure to insert the positioning holes of the MOUNT PLATE, DETECTOR, PG over the guide pins of the CARRIAGE, ASSY. See Figure 4-53. 4. Disengage the four tabs that secure the APG SENSOR to the MOUNT PLATE, DETECTOR, PG, and remove the APG SENSOR. 5. Disconnect the connector from the APG SENSOR. Revision A positioning points tabs C.B.P. 3x8 MOUNT PLATE, DETECTOR, PG APG SENSOR connector Figure 4-53. Removing the APG SENSOR DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 129