Epson 3800 Service Manual - Page 27

EPSON Stylus Pro 3800/3800C/3850 † PG settings list The table below lists the platen gap amounts settable with the printer driver, control panel, and media table. Printer Driver Paper Thickness setting No setting 0.0 to 0.8mm 0.9mm to 1.5mm Table 1-10. PG Setting List Control Panel Setting NARROW STANDARD WIDE WIDER WIDEST -- Media Table or Printer Driver PG Setting Minimum Small Middle Large Minimum Small Middle Large Minimum Small Middle Large Minimum Small Middle Large Minimum Small Middle Large -- PG amount (mm) 0.9 0.9 1.2 1.5 0.9 1.2 1.5 2.1 1.2 1.5 2.1 2.1 1.5 2.1 2.1 2.1 2.1 2.1 2.1 2.1 3.5 Revision A † Firmware version indication The table below explains the meaning of the "o0XXXX-xx.xx.IBC" (firmware version). Item o0 XXXX xx.xx I B C Table 1-11. Firmware Version Indication Explanation A code assigned to each printer. Special version is assigned to "0" (zero). The version of the firmware installed on the printer. The version of the network firmware. A code assigned by product. The code of the printer is "8". When the business system functions are enabled, the printer settings are indicated in hexadecimal (1 to F). bit0: Graphic printing control function. 0: Disabled 1: Enabled bit1: Credit function 0: Disabled bit2: Credit counter 0: The credit function is disabled or the counter is "0" (zero). 1:The credit function is enabled and the counter is 1 or more. bit3: Reserved Shows the custom number when the custom operation has been set using the special setting menu. "0" appears when such operation is not set. PRODUCT DESCRIPTION Operation Panel 27