Epson 3800 Service Manual - Page 219
Click [Run] to start the [Colorimetric Calibration Tool].
UPC - 010343862081
View all Epson 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
EPSON Stylus Pro 3800/3800C/3850 ADJUSTMENT PROCEDURE 1. Turn the printer ON. 2. Start the adjustment program, and select [Colorimetric Calibration Tool]. 3. Click [Run] to start the [Colorimetric Calibration Tool]. 4. Load an A4-sized plain paper vertically on the ASF, and click [Next] to start the alignment check. 5. Examine the printout. If any missing line or segment is observed, run a cleaning. If the pattern is normal, click [Next]. 6. Load an A4-sized EPSON Enhanced (Archival) Matte paper vertically on the ASF, and click [Next] to print a calibration chart. C A U T I O N Never touch the printed calibration chart. 7. Make sure there is no missing dots in the nozzle check pattern at the bottom of the calibration chart. If there are missing dots, click [Print Calibration Chart Again]. The calibration chart will be printed again after performing cleaning. If there are no missing dots, let the chart stand for five minutes until it dries out paying attention not to touch the chart. 8. When the calibration chart dries out (after five minutes), click [Next]. Revision A ADJUSTMENT Figure 5-39. Screen Transition Standard Adjustment 219