Epson 3800 Service Manual - Page 161
Remove the PRINT HEAD from the CARRIAGE, ASSY., and disconnect the, HARNESS, HEAD, A/B from CN1
UPC - 010343862081
View all Epson 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
EPSON Stylus Pro 3800/3800C/3850 C A U T IO N Do not disconnect/insert FFCs from/into the connectors at an angle. Doing so may damage, short, or break the terminals in the connector resulting in a breakdown of the elements on the board. 8. Remove the PRINT HEAD from the CARRIAGE, ASSY., and disconnect the HARNESS, HEAD, A/B from CN1 and CN2 connectors on the PRINT HEAD. See Figure 4-93. A D JU S TM E N T R E Q U IR E D Whenever the PRINT HEAD is replaced, the corresponding adjustments must be carried out. See Chapter 5 "ADJUSTMENT" (p190). Revision A HARNESS, HEAD, A/B PRINT HEAD CN1 CN2 Figure 4-93. Removing the PRINT HEAD DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 161
EPSON Stylus Pro 3800/3800C/3850
Revision A
DISASSEMBLY & ASSEMBLY
Disassembly/Assembly Procedure (Group 1)
161
8.
Remove the PRINT HEAD from the CARRIAGE, ASSY., and disconnect the
HARNESS, HEAD, A/B from CN1 and CN2 connectors on the PRINT HEAD.
See Figure 4-93.
Figure 4-93.
Removing the PRINT HEAD
C
A
U
T
I
O
N
Do not disconnect/insert FFCs from/into the connectors at an angle.
Doing so may damage, short, or break the terminals in the
connector resulting in a breakdown of the elements on the board.
A
D
J
U
S
T
M
E
N
T
R
E
Q
U
I
R
E
D
Whenever the PRINT HEAD is replaced,
the corresponding adjustments must be carried out.
See Chapter 5
"ADJUSTMENT" (p190)
.
HARNESS, HEAD, A/B
CN2
CN1
PRINT HEAD