Epson 3800 Service Manual - Page 142
Frame, Paper, Eject, Assy
UPC - 010343862081
View all Epson 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
EPSON Stylus Pro 3800/3800C/3850 4.3.8.3 FRAME, PAPER, EJECT, ASSY 1. Remove the HOUSING, UPPER. (p106) 2. Remove the STACKER, ASSY. (p132) 3. Remove the BOARD PAPER TRAY. (p138) 4. Unlock the CARRIAGE, ASSY. and move it to the center. (p91) 5. Remove the screw that secures the SLIDER, FRAME, EJ, RIGHT and remove it. One C.B.S. 3 x 6 screw (9 ± 1 kgf.cm) CHECK P O IN T When removing the C.B.S. 3x6 screw that secures the SLIDER, FRAME, EJ, RIGHT, use a stubby screw driver or put a screwdriver (with a 110 mm or longer shaft is recommended) through the holes on the FRAME, ASSY., SUB, RIGHT as shown in Figure 4-68. Insert the two guide pins of the SLIDER, FRAME, EJ, RIGHT into the positioning holes of the main frame to secure the SLIDER, FRAME, EJ, RIGHT. positioning holes Right Side C.B.S. 3x6 Revision A SLIDER, FRAME, EJ, RIGHT Put the screwdriver through this hole. Figure 4-68. Removing the SLIDER, FRAME, EJ, RIGHT guide pins DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 142