Epson 3800 Service Manual - Page 170

EPSON Stylus Pro 3800/3800C/3850 11. Remove the FFCs secured with the two-sided tape to the FRAME ASSY., SUB, RIGHT. See Figure 4-108. 12. Remove the acetate tape shown in Figure 4-109. 13. Remove the five screws that secure the FRAME ASSY., SUB, RIGHT and remove it. See Figure 4-108, 4-109. „ Five C.B.S. 3 x 6 screws (9 ± 1 kgf.cm) CHECK P O IN T To remove/install the two of the five C.B.S. 3x6 screws, insert a screwdriver through the holes on the FRAME, ASSY, SUB, RIGHT shown in Figure 4-108. Make sure to carry out the followings when installing the FRAME ASSY., SUB, RIGHT to the main unit. „ Be sure to align the seven positioning holes of the FRAME ASSY., SUB, RIGHT with the seven ribs on the main frame. „ After fastening the screws shown in Figure 4-109, be sure to reattach the acetate tape, which is removed in step 11., to cover the screw head and the rib so as not to damage the FFCs with them. Right side of the printer positioning points Two-sided Tape C.B.S. 3x6 C.B.S. 3x6 Revision A acetate tape positioning points C.B.S. 3x6 positioning points Figure 4-109. Removing the screws from the FRAME ASSY., SUB, RIGHT Insert a screwdriver through those holes. FRAME ASSY., SUB, RIGHT Figure 4-108. Removing the FRAME ASSY., SUB, RIGHT DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 170