Epson 3800 Service Manual - Page 209
Screws Securing the [LEAF SPRING, LOCK, HEAD], Head Adjust Lever
UPC - 010343862081
View all Epson 3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
EPSON Stylus Pro 3800/3800C/3850 8. Loosen the three screws (A, B and C shown in Figure 5-24) that secure the LEAF SPRING, LOCK, HEAD. 9. Slightly turn the head adjust lever upward and downward to correct the slant of the print head. C z In case of NG Pattern 1: turn the head adjust lever downward. z In case of NG Pattern 2: turn the head adjust lever upward. 10. Tighten the three screws loosened at Step 8 in the order of A o B o C 11. Click [Back] to go back to the previous screen and repeat Step 6 to Step 10 until the correct result is obtained. A Revision A B Figure 5-23. Screws Securing the [LEAF SPRING, LOCK, HEAD] ADJUSTMENT Standard Adjustment Head Adjust Lever Figure 5-24. Head Adjust Lever 209
EPSON Stylus Pro 3800/3800C/3850
Revision A
ADJUSTMENT
Standard Adjustment
209
8.
Loosen the three screws (A, B and C shown in
Figure 5-24
) that secure the
LEAF SPRING, LOCK, HEAD.
9.
Slightly turn the head adjust lever upward and downward to correct the slant
of the print head.
³
In case of NG Pattern 1: turn the head adjust lever downward.
³
In case of NG Pattern 2: turn the head adjust lever upward.
10.
Tighten the three screws loosened at
Step 8
in the order of A
·´
B
·´
C
11.
Click [Back] to go back to the previous screen and repeat
Step 6
to
Step 10
until the correct result is obtained.
Figure 5-23.
Screws Securing the [LEAF SPRING, LOCK, HEAD]
Figure 5-24.
Head Adjust Lever
A
C
B
Head Adjust Lever