Epson 4900 Users Guide - Page 70
Choosing Cut Sheet Paper Options, and select the width of your roll paper.
View all Epson 4900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
70 | Printing With Epson Drivers for Windows Normal cut Double cut Single cut Note: These settings override settings made through the control panel. 8. Choose one of the following Auto Cut settings: • Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, print multiple print jobs without cutting, or if you are printing on heavy media that must be cut by hand. See page 54 for instructions on operating the cutter manually. • Single Cut allows images to be printed end-to-end and saves paper. With borderless printing, you may see a sliver of the previous or next image if you print multiple images in one print job. You will see a white margin between print jobs. • Double Cut extends the space between images and trims each print individually. This provides the cleanest edge for borderless printing. • Normal Cut allows margin space at the top and bottom of each image. 9. Select these additional roll paper options, if necessary: • Auto Rotate saves paper if your document length is shorter than the printable width of the roll. The document is automatically rotated 90 degrees and printed crosswise. Be sure to click Roll Width and select the width of your roll paper. • Print Page Line prints trim lines on the right and bottom edges of your pages. 10. When you're finished, click OK. Choosing Cut Sheet Paper Options Follow the steps in this section to print on cut sheet paper and select settings for borderless printing, if desired. (If you're printing on roll paper, see page 67.) 1. On the Properties or Preferences window, make sure the Main tab is selected. 70