Epson EPL-8000 User Manual - Page 101

Level 2 Options If you select INDIVIDUAL, the next step is assigning memory to each channel. Any channel using the LJ-3, LQ, or FX printer mode requires at least 0.5MB of memory, and any channel using PostScript or Epson GL (available on optional identity cards) requires at least 1.5MB. (Add the requirements of all three channels together to determine the minimum total memory required.) You assign the memory using a value from 0 to 9 for each channel. The factory setting is S:o P:1 O:o. If you want to change the ratio, assign an appropriate number to each channel. For example, if you are using PostScript in the S channel and HP LJ-3 in the I' channel and nothing in the O channel, you could use S:3 P:l O:o because PostScript requires approximately three times as much memory as HP LJ-3. After choosing INDIVIDUAL, press display: to move to the following The number on the left is the total number of megabytes available, and the number to the right of each channel is the proportion of memory allocated to that channel. Use the arrow buttons to choose the new values for each channel. After you finish the memory allocation, press The display shows the following: Menu/submenu Available options < (cancel) or > (execute) Press to save the settings and restart the printer or press to cancel the settings. SelecType 3-33