Epson EPL-8000 User Manual - Page 186

Options After installing additional memory (memory chip set or a memory expansion board), the printer does not function as expected After you turn on the power, the RAM Check message does not display the expected amount of memory. • The RAM chips or the optional memory board may not be installed correctly. Turn off the printer and check the installation. Make sure that the chips are installed in the correct sector of the main board and that each chip is firmly seated in its socket. Also make sure that the notches on the chips are all pointing in the correct direction. See Chapter 7 for detailed instructions. • If you are using the memory board (C82206*), you may not have set the DIP switches correctly. See Chapter 7 for instructions on installing the memory board. Complex pages still cannot be printed and the INSUFF MEMORY message appears on the display. l The SelecType FULL PRINT, RX-BUFFER SIZE, or INDIVIDUAL setting may need to be changed. See Chapter 3 for more information. l You may not have installed enough memory. You can add up to 6.5 MB of memory for a total of 7.5 MB. See Chapter 7 for instructions on increasing the printer's memory. If you have added all of the extra memory possible and the error message continues to appear, you may have to simplify the document you are trying to print. 6-40 Troubleshooting