Epson EPL-8000 User Manual - Page 150

Status and Error Messages [E] ILLEGAL CARD The printer cannot read the card inserted in the slot indicated on the display. To correct the error, press CONTINUE. If the error message remains, make sure the printer is off line and remove the card. If the red CONTINUE light still flashes, press CONTINUE. [S] INIT/IALLIZE The printer is being initialized to the factory settings. [E] INSERT IMAGING CRTG The imaging cartridge is not installed. Install it as described in Chapter 5. [E] INSERT TRAY The standard paper cassette is not installed. Install it as described in Chapter 1. [E] The printer has insufficient memory available for the current task. To correct the error, press CONTINUE. If the message remains, press RESET or initialize the printer as described in Chapter 3. You can also clear this error by turning the printer off and back on again. However, it may be necessary to simplify the page you are trying to print or add more memory to the printer. See Chapter 7 for more information on memory options. [E] INVALID ASSIGN If you assign PostScript to more than one channel, this message appears when you attempt to exit from SelecType. Press to return to MODE ASSIGN and change the assignments. [E] PAGE BUFFER FULL Text or graphics data has filled the printer's buffer and the printer has ejected an incomplete page. Press CONTINUE to clear the error. You may need to add more memory to your printer. See Chapter 7 for information on memory options. 6-4 Troubleshooting