Epson EPL-8000 User Manual - Page 171
LF to OFF., a serial interface, make sure that both the computer and printer
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Printing Problems Text is printed with an extra blank line even after you set AUTO LF to OFF. l Your interface cable may be sending the extra line feed command. Disable the AUTO FEED signal of your interface. See the interface specifications in Appendix A. Every other line of text is printed backwards. l This may happen if you use a word processing program originally set up for use with a daisy-wheel printer. The program is sending every other line backwards to compensate for the reverse movement of the daisy-wheel print mechanism. See your software manual for information on how to adjust the program. Some or all of the output is garbled or printed as asterisks. The interface cable may not be plugged in completely. Make sure that both ends of the cable are plugged in securely. The interface may not be configured correctly. If you are using a serial interface, make sure that both the computer and printer are set to use the same number of data bits per word and that they both use the same parity, baud rate, and number of stop bits. You can also use the data dump mode to check the data being sent from the computer as described later in this chapter. If the printer still does not print correctly, contact your dealer. Troubleshooting 6-25