Epson EPL-8000 User Manual - Page 209
Installing an interface card, Use a cross-head screwdriver to remove the two screws
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Optiona I Interface Cards Installing an interface card 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet and from the back of the printer. 3. Turn the printer around so you are facing the back and disconnect any interface cables. 4. Use a cross-head screwdriver to remove the two screws securing the shield plate to the optional interface slot; then lift off the plate. Be sure to keep both screws; you may use them again in step 7. Options 7-19
Optiona I Interface Cards
Installing an interface card
1. Turn off the printer.
2.
Unplug the power cord from the electrical outlet and from the
back of the printer.
3.
Turn the printer around so you are facing the back and
disconnect any interface cables.
4. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot; then lift
off the plate. Be sure to keep both screws; you may use them
again in step 7.
Options
7-19