Home » Epson Manuals » Laser Printers » Epson EPL-8000 » Manual Viewer

Epson EPL-8000 User Manual - Page 93

ON or OFF

Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Level 2 Options l AUTOFEED - When you set AUTOFEED to OFF, the printer ignores the AUTOFEED signal on pin 14 and does not send an automatic line feed (LF) command with each carriage return (CR). When you set AUTOFEED to ON, the printer adds a line feed to each carriage return it receives. If your text lines overprint each other, set AUTOFEED to ON. Menu/submenu Available options ON or OFF l BUSY DELAY - Use BUSY DELAY to set the delay period from the ACKNLG to the BUSY signal. Available settings are 0, -5, and +5 microseconds plus MIN. The MIN option sets the ACKNLG signal to high. For most applications, leave this option set to the factory setting, 0 microseconds. Menu/submenu Available options -5, 0, +5, or MIN Before you can set options on the SERIAL submenus, you must choose either RS-232C or RS-422 to match your interface. Menu/submenu Available or options RS232C or RS422 I SelecType 3-25

Section	Page
FRONT MATTER	1
CONTENTS	9
INTRODUCTION	12
CHAP 1-SETTING UP	21
Finding a Place for the Printer	22
Unpacking	25
Assembling	28
Installing the cleaning pad	28
The imaging cartridge	32
Attaching the power cord	38
Loading paper in the cassette	39
Turning on the Printer	41
CHAP 2-TESTING AND CONNECTING YOUR PRINTER	43
The Control Panel	44
Display	44
Indicator lights	45
Buttons	46
Testing the Printer	48
Running a test print	48
Printing a status sheet	50
Printing a font sample	52
Enhancing Print Quality	53
Adjusting the print density	53
Resolution Improvement Technology	55
Connecting the Printer to Your Computer	58
Choosing an interface	58
Connecting the parallel interface	59
Connecting the serial interface	61
Testing the computer-to-printer connection to	64
Selecting the Printer Mode	65
Using printer selection menus	65
Sharing the Printer	67
Switching the Printer Mode	68
Intelligent Emulation Switch (IES)	68
Shared Printer Language	68
CHAP 3-SELECTYPE	69
SelecType Overview	70
Level 1 Options	81
Level 2 Options	90
Level 2 Options	90
Test Print	90
Mode Assign	91
I/F Config	92
RX-Buffer Size	98
CH	100
Timeout	102
CH Timeout	103
Auto Cont	103
Beeper	104
P-Config Save	104
Factory Sheet	105
Version	105
Page Counter	106
RITech	106
Standby	106
CHAP 4-PAPER HANDLING	107
Choosing Paper	108
Choosing a Paper Size	111
Paper Feeding and Paper Delivery	112
Paper feeding	112
Paper delivery	112
Loading Paper Manually	114
Using the Optional Lower Paper Cassette	117
Using the Optional Output Tray	121
CHAP 5-MAINTENANCE AND TRANSPORTATION	123
Replacing Consumable Parts	124
Removing the imaging cartridge	125
Cleaning the transfer charger wire	127
Cleaning the glass lens	129
Replacing the cleaning pad	130
Replacing the imaging cartridge	132
Cleaning the Printer	136
Replacing the ozone filter	136
Cleaning inside the printer	139
Removing spilled toner	142
Cleaning the printer case	143
Transporting Your Printer	144
Packing for transportation	144
Unpacking the printer after transportation	145
CHAP 6-TROUBLSHOOTING	147
Status and Error Messages	148
Troubleshooting Directory	155
Paper Jam Problems	157
Feed Jam	158
Paper Jam	162
Power Supply	167
Test Prints	168
Printing Problems	169
Problems with Graphics	173
SelecType Problems	175
Paper Handling	177
Decline in Print Quality	180
Options	184
Data Dump Mode	187
Converting hexadecimal numbers to decimals	189
CHAP 7-OPTIONS	191
Identity Cards	192
Epson PostScript card	192
Epson GL identity card	193
Caring for identity cards	193
Inserting an identity card	194
Removing an identity card	195
Recovering from an error	195
Font Cartridges	196
Compatible font cartridges	197
Inserting a font cartridge	200
Selecting fonts	201
Removing a font cartridge	201
Recovering from an error	202
The Lower Paper Cassette Unit	203
Installing the lower paper cassette unit	203
The Face-up Output Tray	206
Installing the face-up output tray	206
Optional Interface Cards	208
Installing an interface card	209
Memory Options	212
When to increase the printer memory	213
Selecting a memory option	213
Installing additional memory	215
Checking the printer’s memory	226
APPENDIX A-TECHNICAL SPECIFICATIONS	227
Printer Specifications	228
Printing	228
Paper and paper delivery	229
Consumable products	231
Mechanical	232
Electrical	234
Controller hardware	234
Environmental	234
Interface Specifications	235
Parallel interface	235
Serial interface	238
Initialization	242
Option Specifications	243
Lower paper cassette unit Electrical	243
Face-up output tray	244
Shared Printer Language	245
APPENDIX B-HP EMULATION MODE	250
Introduction	251
HP LaserJet series III printer mode	251
Operating the EPL-8000 as a LaserJet IIISi	257
SelecType Options	258
Orient	258
Font	258
Sub Config	259
Available Fonts and Symbol Sets	261
Resident bitmap fonts	261
Resident scalable fonts	262
Symbol sets	266
Default Settings	279
HP Emulation Command Summary	281
Printer commands arranged by topic	282
APPENDIX C-LQ AND FX EMULATION MODE	291
Introduction	292
Operating as an LQ or FX printer	292
SelecType Options	294
Orient	294
Font	294
Sub Config	295
Available Fonts and Symbol Sets	302
Resident fonts	302
Character sets	303
Default Settings	305
LQ and FX Emulation Command Summary	306
Printer commands arranged by topic	309
GLOSSARY	312
INDEX	322
QUICK REFERENCE	328