Epson EPL-8000 User Manual - Page 148
Status and Error Messages, ADD MEMORY FOR CH X
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Status and Error Messages This section contains an alphabetical list of status and error messages that you may encounter and includes likely solutions to problems. If an error occurs, the control panel displays an error message that tells you what is wrong and, in some cases, offers a solution. Status messages also appear on the display during normal operation; they indicate the printer's current status. Note: In some cases, the red CONTINUE light flashes when an error is detected. This requires you to correct the problem and then press the CONTINUE button to clear the error. However, if the AUTO CONT option in SelecType is set to ON, some errors may clear automatically even though the problem remains. See Chapter 3 for details on AUTO CONT. In this section, status messages are preceded by [S], warning messages are preceded by [W], and error messages are preceded by [E]. In some cases the message you see on your display also shows the printer mode. [E] ADD MEMORY FOR CH X The printer has insufficient memory available in the channel displayed. You may have changed the printer mode, increased the RX-BUFFER SIZE setting, or changed the CH INDIVIDUAL setting. To correct the error, decrease the RXBUFFER SIZE setting or change the CH INDIVIDUAL setting in SelecType. Changing the CH setting from INDIVIDUAL to AUTOSENSE may solve this problem. If necessary, add memory to your printer, 6-2 Troubleshooting