Epson EPL-8000 User Manual - Page 306

LQ and FX Emulation Command Summary This section lists the control codes and escape sequences supported in the LQ and FX emulation modes. Some LQ and FX printer codes are not available, either because the functions are not required (such as draft printing) or are not possible because of the different technologies used in these printers. The following commands are either not available or are ignored in LQ or FX emulation mode: ESC < ESC 8 ESC 9 ESC U ESC s ESC r ESC i Unidirectional mode (one line) Disable paper end detector Enable paper end detector Select print direction Set/cancel half-speed printing Select color printing Incremental view The following commands are available in FX mode but not in LQ mode: ESC 1 ESC * ESC I 7/72-inch line feed Select 9-pin graphics mode Select character code table The printer commands listed below function in a slightly different way when used in LQ or FX emulation mode. Also, many of the commands that control the print position use approximations because of the difference in print density between the LQ and FX printers. ESC G / ESC E These commands produce identical bolding effects on your printer. On an actual LQ series printer, these two commands create slightly different effects and can be combined to produce darker characters. C-16 Appendix C