Epson EPL-8000 User Manual - Page 94
RS-422, SelecType, WORD LENGTH
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Level 2 Options After you select the serial interface, you enter one of the submenus shown below. Menu/submenu SERIAL Available options WORD LENGTH BAUDRATE PARITY STOP BIT DTR XON/XOFF ENQ/ACK DSR CTS These settings must match the settings your computer is using. Check your computer's manual. The interface options are the same for both the RS-232C and RS-422 serial interface modes. l WORD LENGTH - You can select B-bit word length or 7-bit word length. See your computer manual and software documentation for the proper setting. The factory setting is B-bit. Menu/submenu Available options 7 or 8 3-26 SelecType
Level 2 Options
After you select the serial interface, you enter one of the submenus
shown below.
Menu/submenu
Available options
SERIAL
WORD LENGTH
BAUDRATE
PARITY
STOP BIT
DTR
XON/XOFF
ENQ/ACK
DSR
CTS
These settings must match the settings your computer is using.
Check your computer’s manual.
The interface options are the same for both the RS-232C and
RS-422
serial interface modes.
l
WORD LENGTH - You can select B-bit word length or
7-bit word length. See your computer manual and software
documentation for the proper setting. The factory setting is
B-bit.
Menu/submenu
Available options
7 or 8
3-26
SelecType