Epson EPL-8000 User Manual - Page 172

Printing Problems The position of the printout is not what you expect. The printed page length differs from the actual length of the paper. l The page length setting in your application program may be incorrect. Make sure that you have set it for the type of paper you are using. You can also change the page length with the SelecType SUB CONFIG option as described in Chapter 3, but keep in mind that your software overrides SelecType settings in most cases. The right or left margin setting does not match the actual width of the paper. l The margin settings of your software program may not be correct. Change the settings of your application program. If this does not correct the problem, you can change the right and left margins with SelecType. The procedure for changing margin settings varies depending on the selected operating mode. See Chapter 3. Even after changing the page length or margin positions, you find that the printed position is not correct. l You may need to set the absolute printing position with the T-OFFSET or L-OFFSET option in the SYSTEM CONFIG menu of SelecType Level 1. This feature allows you to adjust the position of the printable area on the page. See Chapter 3 for more information on using this feature. 6-26 Troubleshooting