Epson EPL-8000 User Manual - Page 152

Status and Error Messages [S] RAM Check X.X MB The printer is checking the available RAM (X.X = capacity). [S] READY The printer is ready to print. [E] REINSERT CARD You may have removed an option card while the FEED light was still lit or while the printer was on line. To correct the error, make sure the printer is off line. Next, reinsert the card into the correct slot and press CONTINUE. See Chapter 7 for more information on optional cards. [E] REMOVE CARD You may have inserted an option card while the printer was on line or while the FEED light was on. Data still remains in the printer's buffer. To correct this error, take the printer off line. Then remove the card and press CONTINUE. Before you reinsert the card, make sure that all data in the buffer has been printed and that the printer is off line. If the FEED light is on, press FEED to print any remaining data. See Chapter 7 for more information on optional cards. [E] RESELECT TRAY The optional lower paper cassette unit is not installed and the INPUT option is set to OPT or AUTO. Turn off the printer and install the optional lower paper cassette unit. If you decide not to use the optional paper cassette unit, press CONTINUE to select paper automatically from the standard paper cassette. After printing, change the INPUT option to STD. [S] RESET The printer has been reset to the macro specified with the SelecType LOAD MACRO option. [S] ROM Check The printer is checking ROM. 6-6 Troubleshooting