Epson EPL-8000 User Manual - Page 86
SelecType, until you see a SET FULL PRINT message. Then, increase
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Level 1 Options Each submenu is explained below. l FULL PRINT - The default setting of 0 is sufficient for most uses of the printer. If you are printing complex pages, you may need to increase the setting. If the printer displays the message SET FULL PRINT, increase this setting. The setting (any number from 0 through 62) times 20 is the number of kilobytes (KB) reserved in RAM for page composition. For example, a setting of 5 reserves 100KB. Menu/submenu Available options 0 to 62 I The following table shows the maximum setting necessary for each size of paper. The setting may be lower than the maximum, but it will never need to be higher. Paper Size A4 A5 B5 LT HLT LG GLT Setting 51 35 43 47 36 62 45 Paper Size GLG EXE F4 MON C10 DL C5 Setting 57 45 57 31 41 37 38 Since the amount of RAM you reserve with this option is not available for any other purpose, it is best to leave the setting at 0 until you see a SET FULL PRINT message. Then, increase the setting in small increments until the error does not occur. If FULL PRINT is set to the maximum value, the printer does not display the SET FULL PRINT error. If an INSUFF MEMORY or PAGE BUFFER FULL message appears, you must install optional memory. See Chapter 7 for information on installing additional memory. 3-18 SelecType