Epson EPL-8000 User Manual - Page 220
CAUTION, Installing chip sets on the memory expansion board, Options
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Memory Options 3. Gently press the chip halfway into the socket. If it goes in at an angle, remove it with a chip puller or a small flat-head screwdriver; then reinsert the chip. CAUTION: Be careful not to scratch the chip or the board when removing the chip. 4. Once the chip is properly inserted, push down firmly on both ends to make sure it is fully seated. 5. Repeat steps 1 through 4 for each of the remaining chips. 6. Reinstall the interface card, if necessary. Installing chip sets on the memory expansion board There are four sectors on the memory expansion board, each containing four chip sockets (identified by their IC numbers). 7-30 Options
Memory Options
3.
Gently press the chip halfway into the socket. If it goes in at
an angle, remove it with a chip puller or a small flat-head
screwdriver; then reinsert the chip.
CAUTION:
Be careful not to scratch the chip or the
board
when
removing the chip.
4.
Once
the
chip is properly inserted, push down firmly on
both ends to make sure it is fully seated.
5.
Repeat steps 1 through 4 for each of the remaining chips.
6. Reinstall
the
interface card, if necessary.
Installing chip sets on the memory expansion board
There are four sectors on the memory expansion board, each
containing four chip sockets (identified by their IC numbers).
7-30
Options