Epson EPL-8000 User Manual - Page 247
Overview of the EJL commands, Appendix A, ESC, SOH, @EJL ENTER LANGUAGE = LQ, < LF >
View all Epson EPL-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Shared Printer Language Perform these steps by sending specific commands from your computer to your printer. For step 1, always send the universal exit command: , Next you must immediately send an EJL command. For example, you can enter LQ mode by sending the following: "@ EJL ENTER LANGUAGE = LQ", < LF > Therefore, you need to send the commands below to switch to the LQ mode: ESC, SOH, @EJL ENTER LANGUAGE = LQ, < LF > The printer mode indicated on the display changes to the new one. Overview of the EJL commands EJL commands must be sent immediately after the printer receives the universal exit command; otherwise, the printer returns to its default printer mode. Every EJL command starts with the following string: @EJL, which must be in uppercase letters, although other commands can be in both upper and lower case. You must send the LF code at the end of an EJL command; only an LF code terminates the EJL command. If the EJL command is not followed by an LF code, the printer does not recognize it as an EJL command; it is then printed as a character string in the current printer mode. If you are in EPSON GL mode, you cannot exit with the universal exit command. You must switch modes with SelecType. A-20 Appendix A