Epson LX-300II Reference Guide - Page 15
Removing a printed document from the push tractor, button. The Tear Off Font lights
View all Epson LX-300II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Removing a printed document from the push tractor Follow these steps to remove the printed document: 1. Press the Tear Off (Font) button. The Tear Off (Font) lights start flashing. (This indicates that your paper is at the current tear-off position.) 2. Open the printer cover and tear off the printed document using the tear-off edge on the paper tension unit. Note: If your paper's perforation is not properly aligned with the tear-off edge, you can adjust the tear-off position using the Micro Adjust feature. See "Adjusting the tear-off position" on page 25. c Caution: Never use the paper feed knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position. 3. Close the printer cover. When you resume printing, the printer automatically feeds the paper back to the top-of-form position and starts printing. Paper Handling 15