Epson LX-300II Reference Guide - Page 87

When you switch between single sheets and continuous, paper, the printer beeps three times and

Get Epson LX-300II - LX-300+ II Impact Printer PDF manuals and user guides View all Epson LX-300II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

When you switch between single sheets and continuous paper, the printer beeps three times and the PAUSE light comes on. Cause What to do You may have tried to change the paper release lever position while paper remained in the printer. Return the paper release lever to the previous position and eject the paper. Then change the paper release lever position. Options When you use the cut-sheet feeder, the paper does not feed properly The paper does not feed. Cause What to do The cut-sheet feeder may be incorrectly installed. Reinstall it as described on page 98. The paper release lever may be in the wrong position. Check that the paper release lever is pushed back to the single-sheet position. You may have loaded too Remove some sheets. many sheets in the bin. Paper may be jammed near Look for a paper jam. the print head. The edge guide positions may be incorrect. Position the edge guides at the diamondshaped guide marks. There may be only one sheet left in the bin. Add more paper. Maintenance and Troubleshooting 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
Maintenance and Troubleshooting
87
Options
When you use the cut-sheet feeder, the paper does not feed
properly
When you switch between single sheets and continuous
paper, the printer beeps three times and the
PAUSE
light
comes on.
Cause
What to do
You may have tried to
change the paper release
lever position while paper
remained in the printer.
Return the paper release lever to the
previous position and eject the paper.
Then change the paper release lever
position.
The paper does not feed.
Cause
What to do
The cut-sheet feeder may
be incorrectly installed.
Reinstall it as described on page 98.
The paper release lever
may be in the wrong
position.
Check that the paper release lever is
pushed back to the single-sheet position.
You may have loaded too
many sheets in the bin.
Remove some sheets.
Paper may be jammed near
the print head.
Look for a paper jam.
The edge guide positions
may be incorrect.
Position the edge guides at the diamond-
shaped guide marks.
There may be only one
sheet left in the bin.
Add more paper.